Previous
This section describes the sizes and weights of originals that can be placed in the ADF or on the exposure glass.
Original location |
Original size |
Original weight |
|---|---|---|
Exposure glass |
Vertical size: Up to 216 mm (8.5 inches) Horizontal size: Up to 297 mm (11.7 inches) |
- |
ADF |
Vertical size: 105 mm to 216 mm (4.1 inches to 8.5 inches) Horizontal size: 128 mm to 600 mm (5.0 inches to 23.6 inches)* * Load the original one by one when it is longer than 356 mm (14.0 inches) |
52-128 g/m2 (14-34 lb. Bond) |
ID Card Feeder |
Vertical size: 54 mm to 220 mm* (2.1 inches to 8.7 inches) Horizontal size 84 mm to 600 mm (3.3 inches to 23.6 inches) * Use Carrier Sheet Type P14 when the vertical size is longer than 148 mm (5.8 inches). |
128-300 g/m2 (34-110 lb. Bond) |
You can load up to approximately 50 originals when their weight is 80 g/m2 or lighter and approximately 20 originals when their weight is heavier than 80 g/m2. Specifications can vary depending on the type and condition of the paper.
You can load one original at a time into the ID Card Feeder.
Place originals in the ADF if they are more than 297 mm (11.69 inches) along the feed direction. If you place them on the exposure glass, the machine will scan only within the maximum scanning size.
