Skip header
 

Precautions for Changing the Paper Size

CAUTION


  • When loading paper, take care not to trap or injure your fingers.


  • If one or more paper feed trays are installed, do not pull out more than one tray at a time when you are changing or replenishing paper or resolving paper jams. Pressing down forcefully on the machine's upper surfaces can result in malfunctions and/or user injury.

Important

  • Do not stack paper over the limit mark.

  • Do not change the size of the paper for the specified printing tray while documents are being scanned or printed.

Note

  • After changing the paper size, be sure to specify the appropriate paper size in [Tray Paper Settings]. If you do not, misfeeds might occur. For details, see Changing Paper Size Settings.

  • To prevent multiple sheets from being fed at once, fan the paper before loading.

  • Straighten curled or warped paper before loading.

  • For details about the paper sizes and types that can be used, see Supported Paper Sizes and Types.

  • If you load paper whose size is not indicated on the paper size dial, you can specify the paper size in [Tray Paper Settings]. For details, see Changing Paper Size Settings.