Skip header
 

Receiving an IP address automatically (DHCP)

Follow the procedure below to set the printer to receive an IP address automatically using DHCP. The DHCP feature is active by default, so this procedure is only required if you have changed the default settings.

Important

  • When [Auto-Obtain (DHCP)] is selected, you cannot configure the IP address, subnet mask, or gateway address.

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Flick the screen to the left, and then press the [User Tools] icon (Operation panel screen illustration).

3Press [Machine Features].

4Press [System Settings].

5Press [Interface Settings].

6Press [Network].

7Press [Machine IPv4 Address].

8Press [Auto-Obtain (DHCP)].

9Press [OK].

10Press [User Tools] (Operation panel screen illustration).

11Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.