Skip header
 

Configure settings when accessing the site for the first time

If you are accessing the Application Site for the first time, configure the following settings:

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Press the [Application Site] icon (Operation panel screen illustration) on the [Home] screen.

If Operation panel screen illustration, the [Application Site] icon, is not displayed on the Home screen, flick the screen, or press Operation panel screen illustration, the Application list, to display the [Application Site] icon (Operation panel screen illustration), and then press the icon.

A confirmation message to update the firmware is displayed if the firmware of the machine needs to be updated to use the Application Site. Follow the instructions on the screen. You can apply the update immediately, or specify the time to apply the update. You can change or cancel the specified time later.

3Press [Next].

4In [Region], specify the region in which you are using the machine.

Operation panel screen illustration

5If you have been notified of the extension code by your sales representative, enter the code in [Extension Code (Optional)], and then press [Next].

6Carefully read the terms of service. If you agree to all the terms, select the [I agree with the terms of service] checkbox, and then press [OK].

Note

  • A message asking whether to save cookies in the web browser may be displayed while you configure the settings. When this message appears, press [OK] to complete the configuration.