Previous
Configuration:
Desktop
Print process:
LED alley and electro-photographic printing
First print speed:
Full color: 8.6 seconds
B&W: 7.2 seconds
Print speed:
One-side printing: 30 pages per minute (A4
, 81/2 × 11)Two-side printing: 28 pages per minute (A4
), 29.5 pages per minute (81/2 × 11)
Resolution:
1200 × 1200 dpi
Equivalent to 600 × 2400 dpi
Equivalent to 600 × 1200 dpi
600 × 600 dpi
Paper size:
For details, see Paper Size Specifications.
Paper weight:
For details, see Paper Type Specifications.
Paper output capacity:
Standard 200 sheets (80 g/m2, 20 lb. BOND)
Paper input capacity:
Tray |
Paper capacity*1 |
|---|---|
Standard paper feed tray |
250 sheets |
Bypass tray |
100 sheets |
250-sheet paper feed unit |
250 sheets |
500-sheet paper feed unit |
500 sheets |
*1 Paper weight: 80 g/m2 (20 lb. BOND)
Power requirements:
(mainly Europe and Asia)220–240 V, 50/60 Hz, 5 A
(mainly North America)120–127 V, 60 Hz, 9 A
Power consumption (complete system):
Maximum: 1,200 W or less
The complete system consists of the main unit and the optional paper feed unit.
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Power consumption (main unit only):
- (mainly Europe and Asia)
Ready: 35.4 W
During printing:
Full color: 502 W
B&W: 461 W
- (mainly North America)
Ready: 37.5 W
During printing:
Full color: 502 W
B&W: 461 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Warm-up time (23 °C (73.4 °F), rated voltage):
20 seconds
Dimensions (W × D × H):
400 × 515 × 360 mm (15.8 × 20.3 × 14.2 inches)
There are protrusions of 16 mm (0.7 inches) on the control panel and 20 mm (0.8 inches) on the handles of the standard paper tray.
When the control panel is tilted, the height increases by up to 79 mm (3.2 inches).
When Tray 1 is extended, the depth increases by 58.6 mm (2.4 inches).
Weight:
Approx. 32 kg (71.0 lb.)
Noise emission:
Sound power level:
Main unit only
Stand-by
29.5 dB (A)
Printing
Full color:
64.0 dB (A)
B&W:
64.5 dB (A)
Complete system
Stand-by
29.5 dB (A)
Printing
Full color:
67.4 dB (A)
B&W:
67.5 dB (A)
Sound pressure level:
Main unit only
Stand-by
20.3 dB (A)
Printing
Full color:
57.6 dB (A)
B&W:
56.6 dB (A)
Complete system
Stand-by
21.8 dB (A)
Printing
Full color:
60.7 dB (A)
B&W:
61.0 dB (A)
Sound power levels and sound pressure levels are actual values measured in accordance with ISO 7779.
Sound pressure levels are measured from the position of the bystander.
The complete system consists of the main unit and the optional paper feed unit.
Memory:
512MB
Interfaces:
Gigabit Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
IEEE 802.11a/b/g/n (Wireless LAN)
Protocol
TCP/IP
Transmission Rate (theoretical value)
1–150 Mbps
A transmission rate of 150 Mbps is a theoretical value of the wireless LAN specification.
The maximum transmission rate in the ad-hoc mode is 54 Mbps for IEEE802.11a and 11 Mbps for IEEE802.11b/g. The Ad-hoc communication is not supported in an IEEE802.11n environment.
Frequency range
(mainly Europe and Asia)2400–2483.5 MHz (1–13 channels)
5150–5250 MHz (36, 40, 44, and 48 channels)
5250–5350 MHz (52, 56, 60, and 64 channels)
5470–5725 MHz (100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140 channels)
(mainly North America)2400–2472 MHz (1–11 channels)
5150–5250 MHz (36, 40, 44, and 48 channels)
5250–5350 MHz (52, 56, 60, and 64 channels)
5470–5725 MHz (100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140 channels)
5725–5850 MHz (149, 153, 157, 161, and 165 channels)
Ad-hoc mode Channel Frequency range
2400–2472 MHz (1–11 channels)
5150–5250 MHz (36, 40, 44, and 48 channels)
The channel in use might differ depending on the country.
Transmission mode
Ad hoc mode
Infrastructure mode
USB 2.0
USB Host
Printer Language:
PCL 5/6, PostScript 3 Emulation, PDF, MediaPrint(JPEG,TIFF)
Fonts:
80 Roman fonts + 13 international fonts
Network:
Topology: The physical or logical layout of the nodes (devices) in a network (10BASE-T/100BASE-TX/1000BASE-T)
Protocol: TCP/IP (IPv4, IPv6)
First print speed, power consumption, warm-up time, sound power level and sound pressure level may differ depending on the conditions and environment of the printer.
