Skip header
 

Precautions

WARNING


  • Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers holding water or any other liquids, on or close to this machine. Fire or electric shock could result from spillage or if such objects or substances fall inside this machine.


  • Do not use flammable sprays or solvents in the vicinity of this machine. Also, avoid placing these items in the vicinity of this machine. Doing so could result in fire or electric shock.

CAUTION


  • Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.


  • Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might occur.

  • Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.


  • Make sure the room where you are using the machine is well ventilated and spacious. Good ventilation is especially important when the machine is used heavily.

Important

  • The area around the ventilation holes might be warm. This is caused by exhaust air and is not a malfunction.

  • If the printer is moved from a cold to a warm place, condensation may be formed inside. After moving the printer, do not use it for at least two hours, so that it can be adapted to its new environment.

  • Do not turn the printer off while it is in operation.

  • Do not open the printer covers while the printer is working. Otherwise, a misfeed might occur.

  • Do not move or tilt the printer when the power is on.

  • Do not subject the printer to shock or impact while it is operating.

  • Depending on the ambient temperature and humidity, steam may come from the ventilation holes behind the control panel during printing. This is water vapor from the paper, not a sign of malfunction.

Ventilation

When you use this machine in a confined space without good ventilation for a long time or print large quantities, you might detect an odd smell.

This might cause the output paper to also have an odd smell.

When you detect an odd smell, regularly ventilate in order to keep the workplace comfortable.

  • Set up the machine so that it does not directly ventilate towards people.

  • Ventilation should be more than 30 m3/hr/person.

New machine smell

When a machine is new, it might have a unique smell. This smell will subside in about one week.

When you detect an odd smell, sufficiently ventilate and circulate the air in the room.