Recycled Paper Setting
You can specify the type of the paper loaded in each tray. For details about available paper types, see Paper Type Specifications.
Default: [Plain Paper 2]
Color Paper Setting
You can specify the type of the paper loaded in each tray. For details about available paper types, see Paper Type Specifications.
Default: [Plain Paper 2]
Special Paper 4 Setting
You can specify the type of the paper loaded in each tray. For details about available paper types, see Paper Type Specifications.
Default: [Plain Paper 2]
Special Paper 5 Setting
You can specify the type of the paper loaded in each tray. For details about available paper types, see Paper Type Specifications.
Default: [Plain Paper 2]
Letterhead Setting
You can specify the type of the paper loaded in each tray. For details about available paper types, see Paper Type Specifications.
Default: [Plain Paper 2]
Label Paper Setting
You can specify the type of the paper loaded in each tray. For details about available paper types, see Paper Type Specifications.
Default: [Thick Paper 2]
Envelope Setting
You can specify the type of the paper loaded in each tray. For details about available paper types, see Paper Type Specifications.
Default: [Thick Paper 2]
Coated Paper Setting
You can specify the type of the paper loaded in each tray. For details about available paper types, see Paper Type Specifications.
Default: [Thick Paper 1]
Preprinted Paper Setting
You can specify the type of the paper loaded in each tray. For details about available paper types, see Paper Type Specifications.
Default: [Plain Paper 2]
Bond Paper Setting
You can specify the type of the paper loaded in each tray. For details about available paper types, see Paper Type Specifications.
Default: [Plain Paper 2]
Cardstock Setting
You can specify the type of the paper loaded in each tray. For details about available paper types, see Paper Type Specifications.
Default: [Thick Paper 1]
Replacement Alert
You can specify when the Alert Indicator lights up to prompt users to replace the print cartridge.
Default: [Normal]
Supply End Option
You can specify whether or not to continue printing after the fusing unit, intermediate transfer unit, and drum unit exceed their service life.
Default: [Continue Printing]
Continue Printing
Stop Printing
Display Supply Info
You can specify whether or not the amount of toner is displayed on the initial screen.
Default: [On]
Unit of Measure
You can switch the unit of measurement between [mm] and [inch].
Default:
(mainly Europe and Asia)
[mm]
(mainly North America)
[inch]
Display Contrast
You can specify the display density by selecting one of seven levels.
Default: Level 4
Key Repeat
You can specify whether or not to scroll the display panel when the [] or [] key is held down.
When you enable this setting, specify the scroll speed. (If repeat time is set to "Long", scroll speed becomes slow.)
Default: [Normal]
Tray Parameters(PCL)
You can configure settings to change paper tray parameters used for PCL printing. You can specify the settings for the installed trays and the Auto Tray Select function.
Auto Select
Tray 1
Tray 2
Bypass Tray
Tray Parameters(PS)
You can configure settings to change paper tray parameters used for PostScript printing. You can specify the settings for the installed trays only.
Tray 1
Tray 2
Bypass Tray