Skip header
 

Contents of Auto e-mail notification

If any of the errors specified in [Auto Email Notification] occurs, the machine sends an e-mail with the following subject:

"Device Alert Notification: XXXXX (description of the error that has occurred)"

The body of the e-mail contains the error details and protocol setting information of the machine. Clear the error according to the description.

If any of the following errors occurs, contact your service representative.

The following is an example of the e-mail body:

Printer:

Cover Open

Details:

Low: Black Toner

Cover Open: Front Cover

----------------------------------------------------------------------

Model Name: XXXXX

Device Name: XXXXX

Comment:

TCP/IP (Ethernet)

Host Name: xxxxx

Domain Name:

IPv4 Address: ***.***.***.***

TCP/IP (Ethernet)

IPv6:

Stateless Address1: ::/0

Stateless Address2: ::/0

Stateless Address3: ::/0

Stateless Address4: ::/0

Stateless Address5: ::/0

MAC Address

Ethernet: 00:00:*74:**:**:**

Print Server Name: XXXXX

NDS Tree:

Machine Name:

Zone Name:

SMB

Workgroup Name: WORKGROUP

Computer Name: XXXXX

Share Name: XXXXX

**********************************************************************

Device Page URL (Ethernet):

http://***.***.***.***/

Message_test

GTS

Notified Group: Name_Group

The contents of the e-mail body vary depending on the machine setting and machine type.

When the error is cleared, the machine sends an e-mail with the following subject:

"Device Recovery Report: XXXXX (description of the error that has been cleared)"