Previous
Printed documents can be folded using the optional Internal Multi-Folding unit attached to the machine.
If the PCL 6 printer driver or PostScript 3 printer driver is used, the fold function can be specified in the [Finishing] menu on the [Detailed Settings] tab. If the PCL 5e printer driver is used, only Z-fold function can be specified in the [Setup] tab. For printing methods, see the printer driver Help.
For details about the optional units required for this function, see Functions Requiring Optional Configurations.
When bidirectional communication is disabled, configure option settings for the machine using the printer driver. If options are not set correctly in the printer driver, you cannot make fold settings even if the optional Internal Multi-Folding unit is installed. For details, see "Configuring Option Settings for the Printer", Driver Installation Guide.
