Tray 3 (LCT)
Consists of two paper trays.
You can load paper even if Tray 3 (LCT) is in use. It is okay to pull out the left half of the tray while Tray 3 (LCT) is in use.
Large capacity tray (LCT)
Paper is loaded here.
Lower paper trays
Consists of two paper trays.
Bridge unit
Relays paper to the finisher.
Internal Multi-Folding unit
The Internal Multi-Folding unit can apply the following folds: Half Fold, Letter Fold-out, Letter Fold-in, and Z-fold.
Mailbox
Sorts printed paper. Consists of mailbox output trays 1–4.
Finisher SR3210
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
Finisher upper tray
Finisher shift tray
Copies can be punched if the optional punch unit is installed on the finisher.
Finisher SR3230
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
Finisher upper tray
Finisher shift tray
Copies can be punched if the optional punch unit is installed on the finisher.
Output jogger
Jogs the sheets delivered to the finisher shift tray.
Attention Light
The attention light flashes or lights up to notify the user of printing errors such as a paper jam, or when no paper is left.
You cannot install multiple finishers simultaneously.
Finisher SR3210 and Finisher SR3230 can be attached only if either the bridge unit or the Internal Multi-Folding unit is installed, and either the lower paper trays or Tray 3 (LCT) is installed.
To use the output jogger, Finisher SR3230 is required.