When there is a problem with the print settings

“Booklet/Half Fold Error”

The job was canceled because you specified invalid settings for saddle stitching or half fold.

Check the settings for saddle stitching or half fold.

“Classification Code is incorrect.”

The classification code has not been entered, or the classification code has been entered incorrectly.

Enter the correct classification code.

“Classification Code is incorrect.”

The classification code is not supported with the printer driver.

Select [Optional] for classification code. For details about how to specify classification code settings, see "Configuring Classification Codes", Print.

“Duplex Cancelled”

Duplex printing was canceled.

• Select the proper paper size for the duplex function. For details about paper, see "Specifications for the Main Unit", Maintenance and Specifications.

• Change the setting for "Apply Duplex" in [System Settings] to enable duplex printing for the paper tray. For details about setting "Apply Duplex", see "Tray Paper Settings", Connecting the Machine/ System Settings.

“Exceeded Max. Pages (Collate)”

The number of pages exceeds the maximum number of sheets that you can use Collate with.

Reduce the number of pages to print.

“Exceeded the maximum number of multi-sheet fold (Half Fold).”

The maximum number of multi-sheet folds (Half Fold) was exceeded.

For details about the maximum number of multi-sheet folds (Half Fold), see "Fold", Print.

“Output Tray Changed”

The output tray was changed because the paper size of the specified output tray is limited.

Specify the proper output tray.

“Print Overrun”

Images were discarded while printing.

Select a lower resolution on the printer driver. For details about how to change the resolution setting, see the printer driver Help.

“Punch has been cancelled.”

Punch printing was canceled.

Check the paper orientation, print orientation, and then punch position. Certain settings can produce print results that might not be as expected.

“Staple has been cancelled.”

Stapling printing was canceled.

Check the paper orientation, paper quantity, print orientation, and staple position. Certain settings can produce print results that might not be as expected.