Skip header
 

Procedure for changing the starting digit of file name serial numbers (classic)

A single-page file is assigned a serial number after the file name. The starting number of this serial number can be changed as follows:

1Press [Send File Type / Name].

Operation panel screen illustration

2Press [Change] to the right of the entry box.

3Using the number keys, enter the starting digit of the serial number.

4Press [Sharp].

5Press [OK].

Note

  • You can change the starting digit only if a single-page file type is selected.

  • You cannot specify "9999" or "99999999" as the starting digits if the scan side in [Original Settings] is set to [2 Sided Original] or [Book Type Original].

  • You can change the number of digits in the serial number in [No. of Digits for Single Page Files] under the [Send Settings] tab in [Scanner Features]. For details, see Send Settings.

PreviousNext