Skip header
 

Registering the Shared Folder of the Destination Computer in the Address Book

You can register destinations to send scanned files in the address book. The registered destinations can be selected easily by pressing the destination key that is displayed on the initial scanner screen.

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Flick the screen to the left, and then press the [Address Book Management] icon.

3Press [New Program].

4Press [Change] next to "Name", enter the name you want to display as the destination, and then press [OK].

5Press [Auth. Info], and then press [Down arrow keyNext].

6Press [Specify Other Auth. Info] in "Folder Authentication".

7Press [Change] next to "Login User Name", enter the login user name on the destination computer, and then press [OK].

8Press [Change] next to "Login Password", enter the login password on the destination computer, and then press [OK].

9Re-enter the password for confirmation, and then press [OK].

10Press [Folder].

11Select a folder from "Browse Network".

  1. Press [Browse Network].

  2. Select the group to which the destination computer belongs. Browse for the domain name/workgroup name.

  3. Press the name of the computer you want to send the file to.

  4. Select the shared folder on the destination computer.

  5. Press [OK], and proceed to Step 13.

    If the folder cannot be selected from Browse Network, proceed to Step 12.

12Enter the computer name or IP address to specify a shared folder as the destination.

  • Entering the computer name to specify a shared folder

    1. Press [Change] next to "Path".

    2. Specify the destination computer and a shared folder.

      For example, if the computer name is "UserPC" and a shared folder name is "scan", use "\\UserPC\scan" as the name of the destination folder.

    3. Press [OK].

  • Entering the IP address to specify a shared folder

    1. Press [Change] next to "Path".

    2. Specify the destination computer and a shared folder.

      For example, if the computer name is "192.168.0.152" and a shared folder name is "scan", use "\\192.168.0.152\scan" as the name of the destination folder.

    3. Press [OK].

13Press [Connection Test].

14When a message indicating that the connection has been successfully established appears, press [Exit].

Note

  • If a message “Connection with PC has failed. Check the settings.” appears, see "Troubleshooting When You Use the Scanner Function", Troubleshooting.

15Press [OK].

To register multiple destination folders, repeat from Step 3.

16Press [User Tools] (Operation panel screen illustration ) on the top right of the screen.