Skip header
 

PictBridge Printing

1Check the machine and the digital camera are both switched on.

2Using a USB cable, connect the digital camera to the machine's USB host interface.

3On your digital camera, select the images you want to print, and specify the printing conditions.

4The machine receives settings from the digital camera and starts printing.

Note

  • Since printing conditions are specified on the digital camera, specifiable parameters depend on the particular digital camera. For details, see your digital camera's manual.

  • Some digital cameras require settings for manual PictBridge operation. For details, see your digital camera's manual.

  • Region A icon(mainly Europe)
    For details about connecting the digital camera to the machine's USB host interface, see "Connecting a Device to the Machine's USB Host Interface (Type 1, 2, 6, and 7) (mainly Europe)" or "Connecting a Device to the Machine's USB Host Interface (Type 3, 4, and 5) (mainly Europe)", Connecting the Machine/ System Settings.

  • Region A icon(mainly Asia)
    For details about connecting the digital camera to the machine's USB host interface, see "Connecting a Device to the Machine's USB Host Interface (Type 1, 2, 5, and 6) (mainly Asia)" or "Connecting a Device to the Machine's USB Host Interface (Type 3 and 4) (mainly Asia)", Connecting the Machine/ System Settings.

  • Region B icon(mainly North America)
    For details about connecting the digital camera to the machine's USB host interface, see "Connecting a Device to the Machine's USB Host Interface (Type 1, 2, 5, and 6) (mainly North America)" or "Connecting a Device to the Machine's USB Host Interface (Type 3 and 4) (mainly North America)", Connecting the Machine/ System Settings.

PreviousNext