The following shows the recommended print area for this machine.
Leading edge: Approx. 4.2 mm (0.17 inches)
Trailing edge: Approx. 4.2 mm (0.17 inches)
Right edge: Approx. 4.2 mm (0.17 inches)
Left edge: Approx. 4.2 mm (0.17 inches)
The print area may vary depending on the paper size, printer language, and printer driver settings.
Depending on the printer driver settings, you may be able to print outside the recommended print area. However, the actual output may not come out as desired, or a paper feed problem may occur.
Because the Edge to Edge Print function is not supported, this setting is disabled even if Edge to Edge Print is specified.
The maximum width of a printable area perpendicular to the feed direction is 305 mm. If the optional Image Area Extension Unit is attached, the maximum width of a printable area can be extended to 316 mm. Printing starts from the upper left corner of the paper in relation to the feed direction. Accordingly, the right and bottom edges of an image will be cropped if the width of the image exceeds the maximum width of a printable area.