[Send Settings] screen

1

Press to select the settings that are appropriate for the type of your original and color mode.

2

Press to select a file type.

3

Press to select the resolution to scan the original.

4

Press to select the sides of the original to scan, such as one side or both sides.

5

Press to select the scanning size of the original.

6

Press to specify a file name.

7

Press to specify the density to scan the original.

You can also specify the density by touching the icon and dragging it right or left.

8

Press to select the orientation of the original.

9

Press to specify the sender.

10

Press to enter the subject of the e-mail.

11

Press to enter the main text of the e-mail.

12

Press to specify the magnification ratio for scanning the original.

13

Press to erase the image from a specified width around the document and in the center of the document when the document is scanned.

14

Press to specify settings for stamps.

15

Press to sign and encrypt the e-mail.

16

Press to scan a large number of originals in several batches and send them together as a single job. You can place multi-page originals in the ADF.

17

Press to scan a large number of originals in several batches and send them together as a single job. Place the originals in the ADF one by one.

18

Press to divide a multi-page original into parts of a specified number of pages each, and then send the documents.

19

To switch the scan setting for additional originals to [1 Sided Original] after scanning one side of the last page of a batch of two-sided originals using the exposure glass, press [Change Setting], and then press [1 Sided Original].

You can select this only if [Batch] or [SADF] is also selected.

20

Press this to notify the sender that the e-mail recipient has opened the e-mail.