Skip header
 

Procedure for Manual Dial (Classic)

1Place the original, and then select the scan settings you require.

2Pick up the handset.

You will hear a dial tone.

3Dial.

Operation panel screen illustration

The machine immediately dials the destination.

If you make a mistake, replace the handset, and then try again from Step 2.

4When the line is connected and you hear a high-pitched tone, press [Start] to send your fax document.

If you hear a voice, tell the receiver that you want to send them a fax document (ask them to switch to facsimile mode).

5Replace the handset.

If you want to cancel a transmission, press [Stop], and then remove the originals.

Note

  • To select a destination from the Address Book, see Using the Address Book to Specify Destinations.

  • The machine does not operate in sleep mode even if you lift the handset of the external telephone. To operate the machine, you must exit sleep mode.

  • Region B icon(mainly North America)
    You can also use the optional handset as an external telephone.