Skip header
 

ID Card Copy

This section describes how to copy the front and back sides of an ID card, or other small original, onto one side of a sheet of paper.

Illustration of ID Card Copy

  1. Front

  2. Back

Important

  • The Duplex function cannot be used with this function. If [1 sided 2 sided:TtoT] is selected, cancel the setting.

This function copies the original on to the top and bottom halves of Portrait paper or the right and left halves of Landscape paper. For example, when copying onto an A4 (81/2 × 11)Portrait size sheet of paper, the front of the original is copied onto the top half of the paper in a space the same as A5 (51/2 × 81/2)Landscape and the back of the original is copied onto the bottom half. Place the original in the center of the scanning area when using this function.

We recommend that you use A4PortraitLandscape or 81/2 × 11PortraitLandscape size paper with this function.

Operation panel screen illustrationWhen Using the Copy Application

Operation panel screen illustration

About how to use the application's screen, see "[Copy] Screen".

Operation panel screen illustrationWhen Using the Copier (Classic) Application

For details about how to use the Classic Copier function, see Procedure for ID Card Copy (classic).

Related topics

Procedure for ID Card Copy (classic)
PreviousNext