Skip header
 

Reducing the Time the Machine Takes to Return from Standby Mode

If the machine is not operated for a certain period of time, the screen will go blank and the machine will enter standby mode. In standby mode, the machine consumes less power than it does in regular mode. However, it takes longer for the machine to return to a ready-to-print state from standby mode.

To reduce the time the machine takes to switch from standby mode, increase the fusing temperature for standby mode.

Important

  • Performing this step increases the amount of power the machine consumes in standby mode.

1In the [Machine: Image Quality] group on the [Adjustment Settings for Skill Operators] menu, select [Adjust Fusing Temperature on Standby] and configure [Temperature on Standby Mode] as follows:

  • Pro 8220S / Pro 8220Y / Pro 8220HT: 120°C

  • Pro 8210S / Pro 8210Y / Pro 8210HT: 165°C

  • Pro 8200S: 160°C

PreviousNext