Previous
Attach the Z-fold support tray for multi-folding unit.
Print the image. Is the problem resolved?
Yes |
Finished! |
No |
Go to the next step. |
In the [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Skilled Operators] menu, set [Adjust Paper Curl] to "Adjust 
Curl".
Select "Strong" or "Weak" to control the level of decurling as required.
Print the image. Is the problem resolved?
Yes |
Finished! |
No |
Contact your service representative. |
For details about attaching the Z-fold support tray for multi-folding unit, see "About This Machine" supplied with the machine.
If the Z-fold support tray for multi-folding unit is attached, the trailing edge of the ejected sheets will not be too close to the paper exit, so no problem will occur. However, the stapled sheets may not be stacked properly.
