Skip header
 

Insufficient Toner Fusing

This section explains how to resolve the problem of insufficient toner fusing on printed copies.

Note

  • To adjust the following settings, pre-register the type of paper in use as a custom paper. For details about registering custom papers, see "Registering a Custom Paper", Paper Settings.

  • Changing the fusing temperature or changing the process speed may produce one or more of the following side effects:

    • Paper curling

    • Paper misfeeding

    • Blisters

    • Glossy lines

    • Change of gloss

  • If one or more of the above side effects occurs, adjust the fusing temperature and process speed by decreasing the fusing temperature and increasing the process speed.

  • Check the toner fusibility as follows:

    • The printed image does not come off.

    • The toner does not come off even if it is lightly rubbed by a nail.

    • The toner does not come off even if it is rubbed by the cloth for cleaning the exposure glass.

Related topics

Solution: