Previous
Before you perform the solution procedure, make sure that replacement parts have not reached their expiration dates. For this, check that each part's [Estimated Life Already Used] counter has not exceeded 100%.
For details about checking the counter, see Adjustment Item Menu Guide.
If the [Estimated Life Already Used] counter has exceeded 100%, replace the corresponding part.
For details about replacing the parts, see Replacement Guide.
In the [Machine: Image Quality] group on the [Adjustment Settings for Skilled Operators] menu, select [Adjust Image Density] and execute [Image Density Adjustment: Manual Execute].
Print the image. Is the problem resolved?
Yes |
Finished! |
No |
Go to the next step. |
Print 100 full-page, solid-fill A4 or LT sheets. Is the problem resolved?
Yes |
Finished! |
No |
Reload with new paper. |
Print the image. Is the problem resolved?
Yes |
Finished! |
No |
Replace the paper with smoother paper. |
If the problem persists, contact your service representative.
