Select one of the three levels of initial print speed reduction at normal room temperatures and above.
The selected initial print speed reduction level in copies-per-minute (CPM) is applied only when printing starts (for approximately 15 to 20 seconds).
This helps improve throughput if the fusing temperature can be kept constant. However, the throughput may decrease in an environment in which the temperature varies.
[Do not Reduce]
Full speed.
[Reduce Level 1]
80% of full speed.
[Reduce Level 2]
65% of full speed.
[Reduce Level 3]
50% of full speed.
The setting will take effect if the ambient temperature is higher than 17°C (62.6°F).
Setting Items |
Values |
---|---|
[Reduce Initial CPM: Normal/High Temp. Environment] |
[Do not Reduce] [Reduce Level 1] [Reduce Level 2] [Reduce Level 3] |