Adjust the nip width between the fusing belt and the pressure roller.
You can reduce creases produced when printing envelopes.
The default setting is 2. To reduce creases, change the setting to 4.
However, doing this may result in insufficient toner fusing, causing toner to shed from the envelopes (cold offset).
Although values from 1 to 4 are displayed, 1 and 3 are not usable.
Setting Items |
Max. Value |
Min. Value |
Step |
Unit |
---|---|---|---|---|
[Fusing Nip Width Setting] |
4 |
1 |
1 |
None |