Adjust the heat roller temperature.
Press [+] to increase the temperature and [-] to reduce it.
Decreasing the temperature too much may cause the toner to not properly fuse to the paper (cold offset).
Increasing the temperature too much may distort the paper and cause glossy lines, paper jams, and insufficient toner fusing (hot offset).
Depending on the type of paper, you can increase the toner gloss by increasing the temperature by 5 to 10°C over the initial factory setting.
Setting Items |
Max. Value |
Min. Value |
Step |
Unit |
---|---|---|---|---|
[Fusing Heat Roller Temperature Adjustment] |
200 |
100 |
1 |
degree(s) |