Previous
Specify whether or not to enable the mode to reduce the jitter*1 produced when paper enters the paper transfer roller.
If [On] is selected, the machine adjusts the interval between sheets to reduce jitter. However, the throughput may be reduced when you use paper larger than A4
or 81/2 × 14. In such a case, select [Off] to improve the throughput.
Jitter does not occur with A4
, 81/2 × 14 or smaller paper.
Setting Items |
Values |
|---|---|
[Avoid Ppr Trnsf Shock Jitter: Feed Interval Adj] |
[On] [Off] |
*1 The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is transmitted to the drum unit via the intermediate transfer belt, causing banding.
