Menu Items and Functions

01

[Wide LCT Fan Setting]

Specify the movement of the three-tray wide LCT (LCIT RT5080) fan.

02

[Adjust Wide LCT Fan Level]

Adjust the capacity of the three-tray wide LCT (LCIT RT5080) fan.

03

[Pickup Assist Setting]

Specify the paper feed roller movement when using three-tray wide LCT (LCIT RT5080), LCT (LCIT RT5070), and multi bypass tray.

04

[Double Feed Detection]

Specify whether or not to detect double feeding of paper.

05

[Skew Detection]

Specify whether or not to detect paper skew.

06

[Color Paper Edge Detection Adjustment]

Adjust the luminance of the contact image sensor (CIS).

07

[Regist Jam Detection with Feed Dir]

Specify whether or not to stop printing when the deviation in the fed direction exceeds the adjustable range (3 mm/0.1 inch) when feeding.

08

[Adj Image Position of Side1 With Feed]

Adjust the horizontal position of the image to be printed on Side 1 of the paper.

09

[Adj Image Position of Side2 With Feed]

Adjust the horizontal position of the image to be printed on Side 2 of the paper.

10

[Adj Image Position of Side1 Across Feed]

Adjust the vertical position of the image to be printed on Side 1 of the paper.

11

[Adj Image Position of Side2 Across Feed]

Adjust the vertical position of the image to be printed on Side 2 of the paper.

12

[Deactivate Image Position Adjustment]

Specify whether or not the machine automatically detects paper pathway deviations during the paper feeding process and adjusts the vertical position of the print image accordingly.

Also specify whether or not to stop printing when the vertical position has deviated exceeding the adjustable range (3 mm/0.1 inch) when feeding.

13

[Adjust Erase Margin of Leading Edge]

Adjust the mask width at the leading edge of the image.

14

[Adjust Erase Margin of Trailing Edge]

Adjust the mask width at the trailing edge of the image.

15

[Adj Magnification of Side1 Across Feed]

Adjust the vertical image scaling on the Side 1 of the paper according to the paper expansion or shrinkage.

16

[Adj Magnification of Side1 With Feed]

Adjust the horizontal image scaling on the Side 1 of the paper according to the paper expansion or shrinkage.

17

[Adj Magnification of Side2 Across Feed]

Adjust the vertical image scaling on Side 2 of the paper according to the paper expansion or shrinkage.

18

[Adj Magnification of Side2 With Feed]

Adjust the horizontal image scaling on Side 2 of the paper according to the paper expansion or shrinkage.

19

[Process Speed Setting]

Adjust the machine's operating speed.

20

[Transfer Timing Roller Feed Speed Adj]

Adjust the transfer timing roller speed.

21

[Fusing Feed Speed Adjustment]

Adjust the fusing roller's speed.

22

[Heat Pipe Motor Feed Speed Adj]

Adjust the speed of the heat pipe motor.

23

[Exit Motor Feed Speed Adjustment]

Adjust the exit motor's speed.

24

[Switchback Entrance Feed Speed Adj]

Adjust the paper feed speed at the switchback entrance.

25

[Switchback Exit Feed Speed Adj]

Adjust the paper feed speed at the switchback exit.

26

[Adjust Toner Adhesion]

Adjust the intermediate transfer belt toner adhesion.

27

[Image Transfer Current Setting]

Adjust the current for image transfer.

28

[Paper Transfer Current Setting: Side 1]

Adjust the current applied to Side 1 for paper transfer.

29

[Paper Transfer Current Setting: Side 2]

Adjust the current applied to Side 2 for paper transfer.

30

[Paper Transfer Current; Lead Edge]

Adjust the paper transfer current at the leading edge of the paper.

31

[Paper Transfer Current; Lead Edge Dist]

Adjust the area at the leading edge of the paper for application of paper transfer current.

32

[Paper Transfer Current; Trail Edge]

Adjust the paper transfer current at the trailing edge of the paper.

33

[Paper Transfer Current; Trail Edge Dist]

Adjust the area at the trailing edge of the paper for application of paper transfer current.

34

[Avoid Ppr Trns Shck Jitr: Fed Intvl Adj]

Specify whether or not to enable the mode to reduce the jitter produced when paper enters the paper transfer roller.

35

[Paper Transfer Feed Speed Adjustment]

Adjust the transfer roller speed.

36

[Updraft Fan]

Adjust the airflow of the updraft fan of the two-tray wide LCT (Vacuum Feed LCIT RT5100).

37

[Blower Fan]

Adjust the airflow of the blower fan of the two-tray wide LCT (Vacuum Feed LCIT RT5100).

38

[Side Fan]

Adjust the airflow of the side fan of the two-tray wide LCT (Vacuum Feed LCIT RT5100).

39

[Vacuum Fan]

Adjust the airflow of the vacuum fan of the two-tray wide LCT (Vacuum Feed LCIT RT5100).

40

[Updraft Fan Shutter]

Specify how the updraft/blower fan shutter of the two-tray wide LCT (Vacuum Feed LCIT RT5100) moves.

41

[Side Fan Shutter]

Specify how the side fan shutter of the two-tray wide LCT (Vacuum Feed LCIT RT5100) moves.

42

[Switch Paper Load Upper Limit]

Switch the upper limit for sheets of paper to be loaded in the two-way wide LCT (Vacuum Feed LUIT RT5100).

43

[Paper Feed Mode (Adjust Fan Level)]

Specify how the two-tray wide LCT (Vacuum Feed LCIT RT5100) fan moves.

44

[Put Pressure before Fusing]

Specify whether or not to have the fusing pressure roller come into contact with the fusing belt before the printing operation (paper feeding) starts.

45

[Startng Time of Ptng Presr before Fusing]

Adjust the timing for the fusing pressure roller to come into contact with the fusing belt before the printing operation (paper feeding) starts.

46

[Fusing Heat Roller Temperature Adj]

Adjust the heat roller temperature.

47

[Fusing Pressure Roller Temperature Adj]

Adjust the pressure roller temperature.

48

[Fusing Nip Width Setting]

Adjust the nip width between the fusing belt and pressure roller.

49

[Paper Feed Interval Setting]

Adjust the interval between the feeding of each sheet.

50

[Reduce Initial CPM: Low Temp. Envrnmt.]

Select one of the three levels of initial print speed reduction at low temperatures.

51

[Reduce Initl CPM: Norml/High Temp Env]

Select one of the three levels of initial print speed reduction at normal room temperatures and above.

52

[Adjust Cleaning Web Motor Interval]

Specify the interval between each activation of the cleaning web.

53

[Adjust Adding Fusing Temperature 1]

Adjust the temperature applied to the fusing unit at the start of paper transfer.

54

[Adjust Adding Fusing Temperature 2]

Adjust the temperature applied to the fusing unit immediately before the start of paper transfer.

55

[Decurler Feed Speed Adj: Curl Adj Off]

Adjust the paper feed speed of the decurler unit when 0310: [Adjust Paper Curl] in the [Adjustment Settings for Skilled Operators] menu is set to "Off".

56

[Decurler Feed Speed Adj: Curl Adj Weak]

Adjust the paper feed speed of the decurler unit when 0310: [Adjust Paper Curl] in the [Adjustment Settings for Skilled Operators] menu is set to "Weak".

57

[Decurler Feed Speed Adj: Curl Adj Strg]

Adjust the paper feed speed of the decurler unit when 0310: [Adjust Paper Curl] in the [Adjustment Settings for Skilled Operators] menu is set to "Strong".

58

[Adjust Z-fold Position 1]

Adjust the width of the bottom end segment of Z- folded sheets when using the multi-folding unit.

59

[Adjust Z-fold Position 2]

Adjust the overall fold size of Z-fold sheets when using the multi-folding unit.

60

[Half Fold Position:Single-sheet Fold]

Adjust the fold position of half fold sheets when using the multi-folding unit.

61

[Letter Fold-out Posn 1: Single-sheet Fld]

Adjust the fold position for the bottom segment of letter fold-out sheets when using the multi-folding unit.

62

[Letter Fold-out Posn 2: Single-sheet Fld]

Adjust the overall fold size of letter fold-out sheets when using the multi-folding unit.

63

[Letter Fold-in Posn 1: Single-sheet Fold]

Adjust the fold position of the bottom segment of letter fold-in sheets when using the multi-folding unit.

64

[Letter Fold-in Posn 2: Single-sheet Fold]

Adjust the overall fold size of letter fold-in sheets when using the multi-folding unit.

65

[Double Parallel Fold Position 1]

Adjust the fold position of the bottom segment 1 of double parallel folded sheets when using the multi-folding unit.

66

[Double Parallel Fold Position 2]

Adjust the fold position of the bottom segment 2 of double parallel folded sheets when using the multi-folding unit.

67

[Adjust Gate Fold Position 1]

Adjust the fold width of the bottom segment 1 of gate folded sheets when using the multi-folding unit.

68

[Adjust Gate Fold Position 2]

Adjust the fold width of the bottom segment 2 of gate folded sheets when using the multi-folding unit.

69

[Adjust Gate Fold Position 3]

Adjust the fold position of the bottom segment 3 of gate folded sheets when using the multi-folding unit.