Specify whether or not to stop printing when the deviation in the feed direction exceeds the adjustable range (3 mm/0.1 inch) when feeding paper in the paper tray or duplex unit.
If [On] is selected, an error message appears and the machine stops printing if the paper misalignment exceeds the adjustable range.
If [Off] is selected, the machine continues printing while the maximum correction of 3 mm (0.1 inch) is applied even though the paper misalignment exceeds the adjustable range.
Setting Items |
Values |
Default Value |
---|---|---|
[Tray 1] |
[On] [Off] |
[On] |
[Tray 2] |
||
[Tray 3] |
||
[Tray 4] |
||
[Tray 5] |
||
[Tray 6] |
||
[Tray 7] |
||
[Duplex] |
||
[Tray T1] |
||
[Tray T2] |
||
[Tray T3] |
||
[Tray T4] |