Specify whether or not to enable the mode to reduce the jitter*1 produced when paper enters the paper transfer roller.
If "1" is selected, the machine adjusts the interval between sheets to reduce jitter. However, the throughput may be reduced when you use paper larger than A4 or 81/2 × 14
. If this happens, turn this setting off to improve the throughput.
Jitter does not occur with A4, 81/2 × 14
or smaller paper.
This setting is not effective for paper fed from paper trays with custom paper presets. For such paper, the value specified in 33: [Avoid Ppr Trns Shck Jitr: Fed Intvl Adj] in "Advanced Settings" takes precedence.
Setting Items |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
---|---|---|---|---|---|
[Avoid Ppr Trnsf Shock Jitter: Feed Interval Adj] |
0 |
1 |
0 |
1 |
– |
*1 The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is transmitted to the drum unit via the intermediate transfer belt, causing banding.