Menu Items and Functions

0101

[Adjust Image Position With Feed Direction]

Adjust the horizontal position of the print image.

0102

[Adjust Image Position Across Feed Direction]

Adjust the vertical position of the print image.

0103

[Adjust Registration Paper Buckle]

Adjust the degree of paper arching at the registration gate^*1.

0104

[Adjust Registration Paper Buckle (Thick Paper)]

Adjust the degree of paper arching at the registration gate^*1 when using paper of Paper Weight 5 to 8.

0105

[Deactivate Image Position Adjustment Across Feed Dir]

Specify whether or not the machine automatically detects paper pathway deviations during the paper feeding process and adjusts the vertical position of the print image accordingly.

Also specify whether or not to stop printing when the vertical position has deviated exceeding the adjustable range (3 mm/0.1 inch) when feeding.

0106

[Select Test Pattern for Image Position Adjustment] ^*2

Select the test image for adjusting the image position.

0107

[ADF Adjustment] ^*2

Adjust the position and scaling applied to scanned images when using the Auto Document Feeder (ADF).

0108

[ADF Double Feed Detection] ^*2

Specify whether or not to detect multiple feeding of originals loaded in the Auto Document Feeder (ADF).

0201

[Adjust Erase Margin With Feed Direction]

Adjust the mask width at the leading edge or trailing edge of the image.

0202

[Adjust Image Density]

Execute image density control manually.

0203

[Image Density Adjustment Execute Interval]

Specify the number of sheets the machine prints before it automatically adjusts image density.

0204

[Adjust Maximum Image Density]

Specify the adhesion of toner to the drum surface and intermediate transfer belt when image density adjustment is executed.

0205

[Adjust Line Width]

Adjust the intensity of the laser for transferring image data to the drum.

0206

[Adjust Density Difference Across Feed Direction]

Adjust the image density difference between the top and bottom of the image.

0207

[Adjust Fusing Temperature on Standby]

Adjust the set fusing temperature according to the machine status.

0208

[Avoid Ppr Trnsf Shock Jitter: Feed Interval Adj]

Specify whether or not to enable the mode to reduce the jitter^*1 produced when paper enters the paper transfer roller.

0211

[Toner Refreshing Mode]

Specify the threshold for the average image area ratio at which toner refreshing mode is enabled.

0212

[Productivity Priority Mode]

Specify whether or not to increase throughput on a job that involves printing on thick and then on thin paper.

0213

[Continuous Slip Sheet Feed Mode]

Specify whether or not to temporarily stop the imaging unit in order to avoid reductions in image quality that may occur in continuous slip sheet feed mode.

0301

[Double Feed Detection]

Specify whether or not to detect double feeding of paper.

0302

[When Double Feed is Detected]

Specify how the machine behaves when it detects a double feed.

0304

[Skew Detection]

Specify whether or not to detect paper skew.

0305

[Skew Detection Level]

Adjust the permissible range of skew.

0306

[Adjust Wide LCT Fan Level]

Adjust the airflow of the three-tray wide LCT (LCIT RT5080) for fanning the sheets.

0307

[Adjust Wide LCT Fan Timer]

Adjust the duration of the airflow of the three-tray wide LCT (LCIT RT5080) for fanning the sheets.

0308

[Pickup Assist Setting]

Specify the paper feed roller movement when using three-tray wide LCT (LCIT RT5080), LCT (LCIT RT5070), and multi bypass tray.

0309

[Adjust Paper Separation Time]

To prevent multi-feeding, adjust the paper separation time when feeding paper.

0310

[Adjust Paper Curl]

Specify the method for straightening curled sheets.

0311

[Registration Jam Detection with Feed Direction]

Specify whether or not to stop printing when the deviation in the feed direction exceeds the adjustable range (3 mm/0.1 inch) when feeding paper in the paper tray or duplex unit.

0312

[Lower Jam Detection Strictness]

Disables the following jam detection functions:

• Skew Detection (J49)

• Registration Detection with Feed Direction out of range(J050) (correction control to be performed)

• Registration Detection across Feed Direction out of range(J080) (correction control to be performed)

In addition, fix the CIS light intensity in Color Paper Correction setting to Color Paper 2.

The setting is applied to all the paper types and trays at a time.

0502

[Execute Photoconductor Refreshing]

Remove dust on the drum surface.

0503

[Unscrew/Screw-on Cap to Replace Toner Bottle]

Screw on or unscrew the toner bottle cap.

0504

[Developer Fill]

Fill the developer unit with fresh developer.

0505

[Developer Fill: Result]

Display the result of filling developer.

0506

[Developer Exhaust]

Discharge used developer into the developer bottle.

0507

[Developer Exhaust: Result]

Display the result of discharging developer.

0509

[Developer Setup: Result]

Display the result of developer setup.

0512

[ITB Manual Lubrication]

Lubricate the intermediate transfer belt.

0515

[Reset Replaceable Parts Counter]

Counter Reset the counter for replaceable parts.

0516

[Estimated Life Already Used]

Display the duty cycle counters of replaceable parts.

0517

[Temperature / Humidity inside the Machine]

Display the internal temperature and humidity.

0518

[Temperature / Humidity outside the Machine]

Display the external temperature and humidity.

0520

[Back Up / Restore Custom Paper Data]

Back up and restore custom paper profiles.

0521

[Counter Settings for Fusing Unit Replacement]

This setting can be used with multiple fuser units.

Up to four fuser units can be recorded.

Displays the counter of each part of the fuser unit.

0522

[Execute Charger Cleaning]

Clean the charge unit.

0601

[Adjust Staple Position for Booklet]

Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5060.

0602

[Adjust Folding Position for Booklet]

Adjust the horizontal position of the folding when using Booklet Finisher SR5060.

0603

[Adjust Staple Position Across Feed Direction 1]

Adjust the vertical position of the staple (applied at an edge) when using the Finisher SR5050 or Booklet Finisher SR5060.

0604

[Adjust Staple Position Across Feed Direction 2]

Adjust the vertical position of the staples (dual) when using the Finisher SR5050 or Booklet Finisher SR5060.

0605

[Adjust Staple Position With Feed Direction]

Adjust the horizontal position of the staples when using Finisher SR5050 or Booklet Finisher SR5060.

0606

[Adjust Punch Position Across Feed Direction]

Adjust the vertical position of the punch holes when using Finisher SR5050 or Booklet Finisher SR5060.

0607

[Adjust Punch Position With Feed Direction]

Adjust the horizontal position of the punch holes when using Finisher SR5050 or Booklet Finisher SR5060.

0608

[Paper Alignment for Booklet Across Feed Dir.]

Adjust the width of the staple jogger^*1 for booklets when using Booklet Finisher SR5060.

0609

[Set Number of Folds for Booklet]

Specify the number of additional booklet folds when using the Booklet Finisher SR5060.

0610

[Paper Alignment for Booklet With Feed Dir.]

Adjust the travel distance of the paper edge stopper for booklets when using Booklet Finisher SR5060.

0611

[Paper Alignment for Stapling Across Feed Direction]

Adjust the width of the staple jogger^*1 for edge stapling when using Finisher SR5050 or Booklet Finisher SR5060.

0612

[Paper Alignment in Shift Tray Across Feed Direction]

Adjust the width of the paper alignment jogger^*1 in the shift tray when using Finisher SR5050 or Booklet Finisher SR5060.

0613

[Paper Alignment for Stapling With Feed Direction]

Adjust the travel distance of the paper edge stopper for edge stapling when using Finisher SR5050 or Booklet Finisher SR5060.

0614

[Punch Skew Correction]

Disable punch skew correction if jams or edge-folding problems occur particularly when punching lightweight paper using Finisher SR5050 or Booklet Finisher SR5060.

0615

[Z-fold Skew Correction]

Specify how to correct skew (occurring during paper transport) when Z-folding with the folding unit.

0616

[Correct Z-fold Skew]

Adjust the length of sheets moved for Z-fold skew correction.

0617

[Correct Z-fold Skew (Reverse)]

Adjust how much the registration roller rotates in reverse for Z-fold skew correction.

0618

[Correct Punch Skew]

Adjust the amount of skew correction for punching when using Finisher SR5050 or Booklet Finisher SR5060.

0619

[Paper Alignment in Shift Tray Setting]

Specify the accuracy of printed paper alignment when applying shift-sorting with the Finisher SR5050 or Booklet Finisher SR5060.

0620

[Number of Sheet Align for Stapling]

Specify the number of sheets the staple unit aligns at a time for stapling.

0621

[Adjust Output Tray Descending Position]

Specify the descending position for the finisher shift tray when paper is delivered to it using Finisher SR5050 or Booklet Finisher SR5060.

0622

[Adjust Exit Guide Close Timing (Booklet Fin)]

Specify when to close the exit guide after paper is delivered to the finisher shift tray of Finisher SR5050 or Booklet Finisher SR5060.

0623

[Output Trail Edge Press Setting]

Specify whether or not to press down the trailing edge of the paper when it is delivered to the finisher shift tray of Finisher SR5050 or Booklet Finisher SR5060.

0624

[Output Fan Setting]

Specify how the shift tray fan moves when using Finisher SR5050 or Booklet Finisher SR5060.

0625

[Adjust Output Fan Level]

Adjust the airflow of the shift tray for fanning the sheets when using Finisher SR5050 or Booklet Finisher SR5060.

0626

[Maximum No. Stacked Sheets in Output Tray]

Specify the amount of paper stacked in Finisher SR5050 or Booklet Finisher SR5060.

0701

[Half Fold Position (Multi-sheet Fold)]

Adjust the fold position of half folded sheets when using the multi-folding unit.

0702

[Letter Fold-out Position 1 (Multi-sheet Fold)]

Adjust the fold position for the bottom segment of letter fold-out sheets when using the multi-folding unit.

0703

[Letter Fold-out Position 2 (Multi-sheet Fold)]

Adjust the overall fold size of letters fold-out sheets when using the multi-folding unit.

0704

[Letter Fold-in Position 1 (Multi-sheet Fold)]

Adjust the fold position of the bottom segment of letter fold-in sheets when using the multi-folding unit.

0705

[Letter Fold-in Position 2 (Multi-sheet Fold)]

Adjust the fold position of letters fold-in sheets when using the multi-folding unit.

0706

[Folding Unit Tray Full Detection]

Specify whether or not to automatically detect when the folding unit tray becomes full.

0707

[Number of Sheets Folded after Full Detection]

Specify the number of sheets the machine prints when it detects that the folding unit tray is full before displaying a warning message.

0708

[Adjust Z-fold Position 1]

Adjust the width of the bottom end segment of Z-folded sheets when using the multi-folding unit.

0709

[Adjust Z-fold Position 2]

Adjust the overall fold size of Z-fold sheets when using the multi-folding unit.

0801

[Cover Sheet Position for Perfect Binding With Feed Dir]

Adjust the horizontal alignment of the cover sheet position when performing perfect binding.

0802

[Cover Sheet Position for Perfect Binding Across Feed Dir]

Adjust the vertical alignment of the cover sheet position when performing perfect binding.

0803

[Adjust Perfect Binding Finishing Angle]

Square the top, bottom, and outside edges when trimming a deck of paper.

0804

[Adjust Applying Binding Glue]

Adjust the amount of glue applied to the book block's spine when you bind copies with the perfect binder.

0901

[Paper Alignment in Stacker Tray Across Feed Direction 1]

Adjust the width of the main jogger^*1 when the high capacity stacker is installed.

0902

[Paper Alignment in Stacker Tray Across Feed Direction 2]

Adjust the width of the sub jogger^*1 when the high capacity stacker is installed.

0903

[Paper Alignment in Stacker Tray With Feed Direction]

Adjust the travel distance of the paper edge stopper when the high capacity stacker is installed.

0904

[Paper Alignment in 2nd Stacker Tray Across Feed Dir. 1]

Adjust the width of the main jogger^*1 when the second high capacity stacker is installed.

0905

[Paper Alignment in 2nd Stacker Tray Across Feed Dir. 2]

Adjust the width of the sub jogger^*1 when the second high capacity stacker is installed.

0906

[Paper Alignment in 2nd Stacker Tray With Feed Direction]

Adjust the travel distance of the paper edge stopper when the second high capacity stacker is installed.

0907

[Maximum Stack Quantity in Stacker Tray]

Set the maximum number of sheets for the stacker tray.