Skip header
 

Distributing Data Using Distributed Scan Management

Configure the distributed scan management (DSM) system on Windows Server.

For the procedure to configure DSM, see Windows Server Help.

1Login to the machine using Windows authentication.

2Press the [Home] key on the control panel.

Home key illustration

3Press the [Scanner] icon on the screen.

If the [Scanner] icon does not appear, press the Operation panel screen illustration icon at the upper right corner of the screen to switch to the menu screen.

4Make sure that no previous settings remain.

If a previous setting remains, press the [Reset] key.

5Press [DSM Destination].

6Place originals.

7If necessary, specify the scan settings according to the original to be scanned.

To change the scan settings, select the [Allow value override at scanner] check box when configuring the device on Windows Server.

8Specify the destination.

9Press the [Start] key.

Note

  • Up to 100 destinations can be displayed in [DSM Destination]. If more than 100 scan processes (destinations) are registered to Windows Server, information for the 100 processes that have been registered recently will be displayed in [DSM Destination].

  • The program function cannot be used with DSM.

PreviousNext