Skip header
 

Print Area

The following shows the recommended print area for this machine.

Illustration of print area for paper numbered callout illustration

  1. Print area

  2. Feed direction

  3. Leading edge

    Non-coated paper:

    Approx. 5.0 ± 1.5 mm (0.2 ± 0.06 inches) for Paper Weight 1–Paper Weight 3

    Approx. 4.0 ± 1.5 mm (0.16 ± 0.06 inches) for Paper Weight 4–Paper Weight 9

    Coated paper:

    Approx. 5.0 ± 1.5 mm (0.2 ± 0.06 inches) for Paper Weight 2–Paper Weight 4

    Approx. 4.0 ± 1.5 mm (0.16 ± 0.06 inches) for Paper Weight 5–Paper Weight 9

  4. Trailing edge

    Non-coated paper:

    Approx. 5.0 ± 2.0 mm (0.2 ± 0.08 inches) for Paper Weight 1–Paper Weight 4

    Approx. 4.0 + 2.0 mm (0.16 ± 0.08 inches) for Paper Weight 5–Paper Weight 9

    Coated paper:

    Approx. 5.5 ± 2.0 mm (0.22 ± 0.06 inches) for Paper Weight 2

    Approx. 5.0 ± 2.0 mm (0.2 ± 0.08 inches) for Paper Weight 3–Paper Weight 6

    Approx. 4.0 ± 2.0 mm (0.16 ± 0.08 inches) for Paper Weight 7–Paper Weight 9

  5. Right edge

    Approx. 2.0 ± 1.5 mm (0.08 inches ± 0.06 inches)

  6. Left edge

    Approx. 2.0 ± 1.5 mm (0.08 inches ± 0.06 inches)

Note

  • The print area may vary depending on the paper size, printer language, and printer driver settings.

  • Depending on the printer driver settings, you may be able to print outside the recommended print area. However, the actual output may not come out as desired, or a paper feed problem may occur.

  • You can remove trailing, top, or bottom margins when printing the document. For details, see System.

PreviousNext