This section explains how you can check the machine's status and the items displayed. Depending on the options installed on the machine, some items might not be displayed.
UNIX: Use the "stat" parameter and the "rsh", "rcp", and "ftp" commands. "rsh" and "rcp" cannot be used in a Windows environment.
telnet: Use the "status" command.
Messages |
Description |
|
---|---|---|
Add staples (Booklet: Back) |
The staple of booklet finisher (back) is exhausted. |
|
Add staples (Booklet: Both) |
The staple of booklet finisher is exhausted. |
|
Add staples (Booklet: Front) |
The staple of booklet finisher (front) is exhausted. |
|
Adjusting... |
The machine is initializing or calibrating. |
|
Call Service Center |
There is a malfunction in the machine. |
|
Canceling Job... |
The job is being reset. |
|
Configuring... |
Setting is being changed. |
|
Cover Open: Drawer |
The drawer is open. |
|
Cover Open: Finisher Front |
The front cover of Finisher is open. |
|
Cover Open: Interposer Base |
The interposer base cover is open. |
|
Cover Open: Interposer Cover |
The interposer cover is open. |
|
Cover Open: LCT Cover |
The LCT upper cover is open. |
|
Cover Open: Lower Front Cover |
The lower front cover is open. |
|
Cover Open: Lower Right Cover |
The lower right cover is open. |
|
Cover Open: Mailbox |
The mailbox cover is open. |
|
Cover Open: Toner Cover |
The toner cover is open. |
|
Cover Open: Upper Right Cover |
The duplex unit is not correctly set. |
|
Cover Open: Upper Right Cover |
The upper right cover is open. |
|
Cover Open:FoldUnit Front Cover |
The folding unit front cover is open. |
|
Current Job Suspended |
The current job is suspended. |
|
Empty: Black Toner |
The black print cartridge is almost empty. |
|
Empty: Black Toner Cartridge |
The black print cartridge is empty. |
|
Empty: Cyan Toner |
The cyan print cartridge is almost empty. |
|
Empty: Cyan Toner Cartridge |
The cyan print cartridge is empty. |
|
Empty: Magenta Toner |
The magenta print cartridge is almost empty. |
|
Empty: Magenta Toner Cartridge |
The magenta print cartridge is empty. |
|
Empty: Yellow Toner |
The yellow print cartridge is almost empty. |
|
Empty: Yellow Toner Cartridge |
The yellow print cartridge is empty. |
|
Energy Saver Mode |
The machine is in Energy Saver Mode. |
|
Error: Ethernet Board |
An Ethernet board error has occurred. |
|
Error: HDD Board |
A hard disk drive board error has occurred. |
|
Error: Optional Font |
An error has occurred in the font file of the machine. |
|
Error: Parallel I/F Board |
An error has occurred in the parallel interface. |
|
Error: PDL |
An error has occurred in the page description language. |
|
Error: Rem. Certificate Renewal |
An error has occurred in the remote server renewal. |
|
Error: USB Interface |
An error has occurred in the USB interface. |
|
Error: Wireless Card |
There is a problem with IEEE802.11a/b/g/n interface unit, or it is not supported. |
|
Full: Copy Tray |
The copy tray is full. |
|
Full: Finisher Booklet Tray |
Booklet tray of Finisher is full. |
|
Full: Finisher Shift Tray |
Shift tray of Finisher is full. |
|
Full: Finisher Upper Tray |
Finisher's upper tray is full. |
|
Full: Folding Unit Tray |
The folding unit tray is full. |
|
Full: Hole Punch Receptacle |
Punch Chip receptacle for hole punch is full. |
|
Full: Mailbox Tray 1 |
The mailbox tray 1 is full. |
|
Full: Mailbox Tray 2 |
The mailbox tray 2 is full. |
|
Full: Mailbox Tray 3 |
The mailbox tray 3 is full. |
|
Full: Mailbox Tray 4 |
The mailbox tray 4 is full. |
|
Full: Mailbox Tray 5 |
The mailbox tray 5 is full. |
|
Full: Mailbox Tray 6 |
The mailbox tray 6 is full. |
|
Full: Mailbox Tray 7 |
The mailbox tray 7 is full. |
|
Full: Mailbox Tray 8 |
The mailbox tray 8 is full. |
|
Full: Mailbox Tray 9 |
The mailbox tray 9 is full. |
|
Full: Waste Staples |
The waste staples are full. |
|
Full: Waste Toner |
The waste toner is full. |
|
Hex Dump Mode |
It is a hex dump mode. |
|
In Use: Folding Unit |
Other function is using the folding unit. |
|
In Use: Input Tray |
Other function is using the input tray. |
|
In Use: Staple Unit |
Other function is using the staple unit. |
|
Independent-supplier Toner |
Toner that is not recommended is set. |
|
Jobs Suspended |
All jobs are suspended. |
|
Loading Toner... |
Toner is being supplied. |
|
Low Power Mode |
The machine is in Low Power Mode. |
|
Low: Black Toner |
The black print cartridge is not set correctly, or toner is almost running out. |
|
Low: Cyan Toner |
The cyan print cartridge is not set correctly, or toner is almost running out. |
|
Low: Magenta Toner |
The magenta print cartridge is not set correctly, or toner is almost running out. |
|
Low: Yellow Toner |
The yellow print cartridge is not set correctly, or toner is almost running out. |
|
Malfunction: Finisher |
There is a problem with the finisher. |
|
Malfunction: Folding Unit |
There is a problem with the folding unit. |
|
Malfunction: Interposer |
There is a problem with the interposer or twin interposer. |
|
Malfunction: LCT |
There is a problem with the large capacity tray. |
|
Malfunction: Multi-hole Punch |
There is a problem with the multi-hole punch unit. |
|
Malfunction: Output Tray |
There is a problem with the output tray. |
|
Malfunction: Staple Unit |
There is a problem with the staple unit. |
|
Malfunction: Tray 1 |
There is a problem with tray 1. |
|
Malfunction: Tray 2 |
There is a problem with tray 2. |
|
Malfunction: Tray 3 |
There is a problem with tray 3. |
|
Mismatch: Paper Size |
Indicated paper tray does not contain paper of selected size. |
|
Mismatch: Paper Size and Type |
Indicated paper tray does not contain paper of selected size and type. |
|
Mismatch: Paper Type |
Indicated paper tray does not contain paper of selected type. |
|
Nearly Full: Waste Toner |
Waste toner bottle is nearly full. |
|
Near Replacing: Cleaning Web |
The cleaning web is almost empty. |
|
Need more Staples |
Stapler has almost run out of staples. |
|
No Paper: Selected Tray |
There is no paper in specified tray. |
|
Not Detected: Black Toner |
Black toner is not correctly set. |
|
Not Detected: Cleaning Web |
The cleaning web is not correctly set. |
|
Not Detected: Cyan Toner |
Cyan toner is not correctly set. |
|
Not Detected: Decurler Unit |
The decurler unit is not correctly set. |
|
Not Detected: Fusing Unit |
The fusing unit is not correctly set. |
|
Not Detected: Input Tray |
The paper feed tray is not correctly set. |
|
Not Detected: Interposer |
The interposer is not correctly set. |
|
Not Detected: LCT |
Large capacity tray is not correctly set. |
|
Not Detected: Magenta Toner |
Magenta toner is not correctly set. |
|
Not Detected: Waste Toner Bottle |
Waste toner bottle is not correctly set. |
|
Not Detected: Yellow Toner |
Yellow toner is not correctly set. |
|
Not Detected:C DrumCleaner Unit |
The drum cleaner unit for cyan is not correctly set. |
|
Not Detected:K DrumCleaner Unit |
The drum cleaner unit for black is not correctly set. |
|
Not Detected:M DrumCleaner Unit |
The drum cleaner unit for magenta is not correctly set. |
|
Not Detected:Transfer Clnng. U. |
The transfer cleaning unit is not correctly set. |
|
Not Detected:Y DrumCleaner Unit |
The drum cleaner unit for yellow is not correctly set. |
|
Offline |
Machine is offline. |
|
Paper in Aligner Tray |
The paper remains in the aligner tray. |
|
Paper in Folding Unit |
The paper remains in the folding unit. |
|
Paper Misfeed: ADF |
The paper has jammed in ADF. |
|
Paper Misfeed: Duplex Feed Unit |
The paper has jammed in the duplex feed unit. |
|
Paper Misfeed: Finisher |
The paper has jammed in Finisher. |
|
Paper Misfeed: folding unit |
The paper has jammed in the folding unit. |
|
Paper Misfeed: Input Tray |
The paper has jammed in the input tray. |
|
Paper Misfeed: Interposer |
The paper has jammed in the interposer or twin interposer. |
|
Paper Misfeed: Mailbox |
The paper has jammed in the mailbox. |
|
Paper Misfeed: Output Tray |
The paper has jammed in the output tray. |
|
Printing... |
Printing is in progress. |
|
Proxy User/Password Incorrect |
The proxy user name and/or password setting is incorrect. |
|
RC Gate Connection Error |
RC Gate communication error has occurred. |
|
Ready |
The machine is ready to print. |
|
Renewing Remote Certificate |
The remote certificate is being renewed. |
|
Replace Cleaning Web |
It is time to replace the Cleaning Web. |
|
Reset IPDS fonts |
An IPDS font error has occurred. |
|
SD Card Authentication failed |
SD card authentication failed. |
|
Supplies Order Call failed |
The supply order call has failed. |
|
Suspend / Resume Key Error |
The stop button of Finisher SR4110 was pressed. |
|
Tray Error: Chaptering |
The paper feed tray specification error has occurred because chaptering as well as the normal paper use the same tray for printing. |
|
Tray Error: Duplex Printing |
Selected paper tray cannot be used for duplex printing. |
|
Warming Up... |
The machine is warming up. |
Check the error contents that may be printed in the configuration page.