This section explains how to identify the machine's interface and connect the machine according to the network environment.
USB Host Interface
Port for connecting a USB interface cable or USB interface device
Use this interface to connect the machine to a card authentication device, or external keyboard.
Gigabit Ethernet port
Port for using a 1000BASE-T, 100BASE-TX, or 10BASE-T cable
Use this interface to connect the machine to a network.
If you use an Ethernet interface cable that supports 1000BASE-T, set [Ethernet Speed] to [Auto Select: Enable 1Gbps] in [Interface Settings] in [System Settings].
IEEE 1284 port (optional)
Port for connecting an IEEE 1284 interface cable
Wireless LAN port (optional)
Port for using a wireless LAN
The slot can contain one module only: You can install one IEEE 1284 interface board or one Wireless LAN interface unit at a time in this slot.
The Gigabit Ethernet port and Wireless LAN interface unit cannot be used simultaneously. If the optional Wireless LAN interface unit is installed, you need to set [LAN Type] to [Wireless LAN] in [Interface Settings] in [System Settings].