This section explains how to set defaults for the initial screen, which appears when the machine is turned on or when settings are cleared or reset.
The following settings can be registered as defaults:
Copier:
Color mode, original type, density, Original Settings, paper tray, Store File (except for User Name, File Name, Password, and Target Folder to Store), Auto Reduce / Enlarge, Create Margin, ID Card Copy, Finishing, Cover/Slip Sheet, Edit / Color, Dup./Combine/Series, Reduce / Enlarge, number of copies
Document Server:
Initial document print screen
Finishing, Cover/Slip Sheet (except for Main Sheets in Designate / Chapter), Edit / Stamp, 2 Sided / Book, number of prints
Initial scan original screen
Color mode, original type, density, Original Settings, paper tray, Auto Reduce / Enlarge, Create Margin, Edit / Color, Dup./Combine/Poster, Reduce / Enlarge
Scanner:
Scan Settings, density, Original Feed Type, Send File Type / Name (except for Security Settings and Start No.), Store File (except for User Name, File Name, Password, and Target Folder to Store), Preview, Text, Subject, Security, Recept. Notice, File Emailing Method
This section explains how to change the default functions of the initial copy screen.
Specify scan settings and any other settings you require on the initial copy screen.
Press the [Program] key.
Press [Program as Defaults].
Press [Program].
To restore the factory default settings on the initial screen, press [Restore Factory Defaults], and then press [Yes].
Press [Yes].
The default settings can be programmed separately for the normal and simple screens.