Previous
Configuration:
Console
Hard disk:
320 GB × 2
Photosensitivity type:
OPC drum
Original scanning:
CMOS Image Sensor
Copy process:
Dry electrostatic transfer system
Development:
Dry two-component magnetic brush development system
Fusing:
Fusing belt type
Resolution:
Scanning originals: 600 dpi
Copying: 1,200 × 4,800 dpi
Exposure glass:
Stationary original exposure type
Original reference position:
Rear left corner
Warm-up time (23°C (73.4°F), rated voltage)
119 seconds
Originals:
Sheet, book, three-dimensional object
Maximum original size (ADF, exposure glass):
A3
Paper size:
Trays 1–3 and the bypass tray:
For details, see Recommended Paper Sizes and Types.
Duplex:
A3
, A4
, A5, A6, B4 JIS, B5 JIS, B6 JIS,11 × 17
, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 10, 71/4 × 101/2, 51/2 × 81/2, 8K, 16K,12 × 18
, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 13 × 191/5, 13 × 19, 123/5 × 191/5, 123/5 × 181/2, 13 × 18, SRA3, SRA4, 226 × 310 mm, 310 × 432 mm, 81/2 × 132/5, 41/5 × 51/2Duplex (custom size):
Vertical: 100.0–330.2 mm (3.94–13.00 inches)
Horizontal: 139.7–487.7 mm (5.50–19.20 inches)
Paper weight:
Trays 1–3 and the bypass tray:
For details, see Recommended Paper Sizes and Types.
Duplex: 52.3–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index)
For details about and recommendations concerning thick paper, see Thick paper.
Missing image area (Copier):
For details, see Missing image area.
First copy/print time:
Type 1
Full color: 10.6 seconds or less*1
B&W: 9.2 seconds or less*1
Type 2
Full color: 9.6 seconds or less*1
B&W: 8.1 seconds or less*1
*1 The first copy/print time may differ depending on the conditions and environment of the machine.
Copy/print speed (Full Color / B&W):
Type 1: 65 sheets/minute (A4
, 81/2 × 11, Paper Weight 2)Type 2: 80 sheets/minute (A4
, 81/2 × 11, Paper Weight 2)
Reproduction ratio:
Preset reproduction ratios (%):
Enlargement: 400, 200, 141, 122, 115
Full size: 100
Reduction: 93, 82, 75, 71, 65, 50, 25
Zoom: From 25–400% in increments of 1%
Maximum continuous copy run:
9,999 sheets
Paper capacity (80 g/m2, 20 lb. Bond):
Tray 1 (Tandem tray): 2,500 sheets (1,250 sheets × 2)
Trays 2 and 3: 550 sheets
Bypass tray: 250 sheets
Power requirements:
220–240 V, 12–10 A, 50/60 Hz
Power consumption
Main unit only
Type 1
Type 2
Ready
206 W
203 W
During printing
B&W: 1,304 W
Color: 1,430 W
B&W: 1,437 W
Color: 1,596 W
Maximum
2,400 W or less
2,400 W or less
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Type 1
Type 2
Maximum
2,400 W or less
2,400 W or less
The complete system consists of the main unit, wide LCT, decurler unit, interposer, Booklet Finisher SR4130, output jogger, and cooling fan unit.
Dimensions (W × D × H up to ADF (excluding the control panel and the attention light)):
1,165 × 880 × 1,225 mm (45.9 × 34.7 × 48.3 inches)
Space for main unit (W × D):
1,535 × 880 mm (60.5 × 34.7 inches) (including the bypass tray and copy tray)
Noise emission
Sound power level:
Main unit only
Type 1
Type 2
Stand-by
36.8 dB (A)
36.6 dB (A)
Copying
B&W: 68.3 dB (A)
Color: 68.8 dB (A)
B&W: 69.4 dB (A)
Color: 69.9 dB (A)
Complete system
Type 1
Type 2
Stand-by
44.2 dB (A)
44.4 dB (A)
Copying
73.3 dB (A)
74.6 dB (A)
Sound pressure level:
Main unit only
Type 1
Type 2
Stand-by
23.7 dB (A)
23.8 dB (A)
Copying
B&W: 54.8 dB (A)
Color: 55.2 dB (A)
B&W: 56.2 dB (A)
Color: 56.6 dB (A)
Complete system
Type 1
Type 2
Stand-by
32.5 dB (A)
32.3 dB (A)
Copying
57.9 dB (A)
60.2 dB (A)
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system of consists of the main unit, ADF, wide LCT, buffer pass unit, multi-folding unit, interposer, Booklet Finisher SR4130, and output jogger.
Weight:
Approx. 262 kg (577.7 lb.)
We have obtained each author's permission for the use of applications including open-source software applications. For details about the copyright information for these software applications, see "OSS.pdf", "copy_linux.txt", or "u-boot_copy.txt" on the CD-ROM supplied with the machine.
