Previous
The paper size setting is changed in the same way for each paper tray.
For details about how to change the paper size in Trays 2–3, see Loading Paper into Trays 2 and 3.
Check that the paper edges are aligned at the right side.
If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side fences may slip out of place.
When loading a low number of sheets, be sure not to squeeze the side fences in too tightly. If the side fences are squeezed too tightly against the paper, the edges may crease, the paper may misfeed, or if it weighs between 52.3–65.9 g/m2 (14.0–17.9 lb. Bond), it may wrinkle.
After sliding the paper tray in, make sure that the paper size is changed correctly on the [Top] screen. To display the [Top] screen, display the [Home] screen and press the
icon at the upper right corner of the screen.You can load envelopes into Trays 2 and 3. When loading envelopes, place them in the correct orientation. For details, see Envelopes.
