Skip header
 

Loading Paper into the Large Capacity Tray

The LCT can hold A4Portrait paper only. If you want to print on 81/2 × 11Portrait or B5 JISPortrait from the LCT, contact your service representative.

Important

  • Check that the paper edges are aligned at the left side.

1Check that paper in the paper tray is not being used, and then open the top cover of the LCT.

LCT illustration

2Load paper into the paper tray with the print side up.

Do not stack paper over the limit mark.

LCT illustration

3Press the [Down] key.

The key blinks while the bottom plate is moving down.

LCT illustration

4Load paper by repeating Steps 2 and 3.

5Close the top cover of the LCT.

PreviousNext