Skip header
 

Loading Paper into the A3/11 × 17 Tray Unit

A3/11 × 17 tray unit can hold A3Landscape paper only. If you want to print on A4PortraitLandscape, B4 JISLandscape, 11 × 17Landscape, 81/2 × 14Landscape, or 81/2 × 11PortraitLandscape, contact your service representative.

Important

  • Check that the paper edges are aligned at the right side.

1Check that paper in the paper tray is not being used, and then pull the tray carefully out until it stops.

A3/11 x 17 tray unit illustration

2Square the paper and load it print side down.

Do not stack paper over the limit mark.

A3/11 x 17 tray unit illustration

3Carefully push the paper tray fully in.

PreviousNext