Sizes Detectable with Auto Paper Select

The following sizes and orientations of originals are detected automatically:

Original location	A3	B4 JIS	A4	B5 JIS	A5	A5	B6 JIS
Exposure glass	^*1	^*1	^{1, 2}	^*1	^*1	×^1,3	×
ADF							^*4

Original location	11 × 17	8¹/₂ × 11	8¹/₂ × 13
Exposure glass	×	×^*2	^*7
ADF	^*5	^*6	^*7

: Detectable size, ×: Undetectable size

*1 If you want to switch the detectable sizes from these sizes to 8K and 16K, contact your service representative.

*2 Default is A4. If you want to switch the detectable size from A4 to 8¹/₂ × 11, contact your service representative.

*3 If you want to make A5 size detectable, contact your service representative.

*4 You cannot use the two-sided scanning mode.

*5 Default is 11 × 17. If you want to switch the detectable size from 11 × 17 to 8K, contact your service representative.

*6 Default is 8¹/₂ × 11. If you want to switch the detectable size from 8¹/₂ × 11 to 16K, contact your service representative.

*7 Default is 8¹/₂ × 13. If you want to switch the detectable size from 8¹/₂ × 13 to 8¹/₄ × 13 or 8 × 13, contact your service representative.

Originals whose size is non-auto detectable will be scanned at the wrong paper size if fed in from the ADF.
If the size of your original cannot be detected automatically, you must specify its size. If the size is not specified, part of the image may be cropped or not output satisfactorily. For details about how to specify the size of the originals, see "Specifying Original Sizes", Copy/ Document Server or "Specifying Scan Settings", Scan.