Applies a single, central fold to create two equal panels.
The key displayed in Step 2 differs depending on the options that are installed.
When the multi-folding unit is installed: [Folding Unit]
When the booklet finisher is installed: [Finisher]
Press [Finishing].
Select [Folding Unit] or [Finisher].
Press [Half Fold].
Press [Change] if you select [Folding Unit] in Step 2.
Select [Fold Orientation], [Print Side], and [Multi-sheet Fold].
Press [OK] twice.
Place the originals, and then press the [Start] key.
The tray where folded copies are delivered differs depending on the options that are installed.
When using the multi-folding unit: to the folding unit tray
When using the booklet finisher: to the finisher booklet tray
The following copier functions are not available when the Half Fold function is enabled:
Punch
Staple
The maximum number of sheets folded by the Multi-sheet Fold function differs depending on the options that are installed.
When using the multi-folding unit: up to three sheets
When using Booklet Finisher SR4130: up to five sheets
When using Booklet Finisher SR5080: up to six sheets
When you enable the Multi-sheet Fold function (by setting it to [On]), the Sort function is automatically applied also.
If the Booklet or Magazine function is selected, the settings for those functions have priority.