Each copy set can be stapled together.
Original orientation and staple position
Place all the originals in the ADF in the orientation in which they can be read normally. When placing the original on the exposure glass, keep the same orientation, but place the original facing downwards.
When the paper that is loaded is the same size and orientation as the original, the relationship between the orientation in which you place the original and the staple positions is as follows. However, if you cannot place originals in the orientation, rotate and place them. You can confirm the staple positions that can be selected on the screen that appears when [Finishing] is pressed.
Original orientation |
Original orientation |
Original orientation |
Original orientation |
Staple position*1 |
|
---|---|---|---|---|---|
Top 1 |
|||||
Slant |
|||||
Bottom 1 |
|||||
Left 2 |
|||||
Top 2 |
|||||
Center |
*1 The above tables show stapling positions. The orientation of paper does not indicate the orientation of delivery.
*2 You cannot perform stapling at this position when copying onto B4 JIS, 8 × 13 or larger.
*3 If you want to perform stapling at this position, rotate and place the originals, and then select Top 2.
For details about how to use the Copier function, see Procedure for Staple.