Skip header
 

Procedure for copying onto translucent paper

1Load the paper face up in the bypass tray.

The bypass tray (Operation panel screen illustration) is automatically selected.

2Press the [Sharp] key.

3Press [Paper Size].

4Specify the paper size, and then press [OK].

5Press [Paper Type].

6Press [Down arrow keyNext].

7Press [Translucent Paper], and then press [OK] twice.

8Place the originals, and then press the [Start] key.

Note

  • You can also load translucent paper into the paper trays and make copies on it. Be sure to specify the paper type under [Tray Paper Settings]. For details, see "Changing Tray Paper Settings", Paper Settings.

PreviousNext