使用“etherconfig”命令可查看和配置以太网参数。
查看设置
msh> etherconfig
指定以太网速度
msh> etherconfig speed {auto_100|auto_1000|10f|10h|100f|100h}
Auto_100=自动100选择
Auto_1000=自动1000选择
10f=10 Mbps全双工
10h=10 Mbps半双工
100f=100 Mbps全双工
100h=100 Mbps半双工
默认值为“auto_100”。
如果您使用支持1000BASE-T的以太网接口,请在[系统设置]的[接口设置]中将[以太网速度]设置为[自动选择:启用1Gbps]。