Skip header
 

Settings You Can Configure Using the Control Panel

Use the control panel to configure the security settings shown in the following table.

System Settings

Tab

Item

Setting

Timer Settings

Auto Logout Timer

On: 180 seconds or less.

See Auto Logout.

Administrator Tools

User Authentication Management

Select [Basic Auth.], and then set "Printer Job Authentication" to [Entire].

See Basic Authentication.

Administrator Tools

Administrator Authentication ManagementUser Management

Select [On], and then select [Administrator Tools] for "Available Settings".

See Configuring Administrator Authentication.

Administrator Tools

Administrator Authentication ManagementMachine Management

Select [On], and then select each of "Available Settings".

See Configuring Administrator Authentication.

Administrator Tools

Administrator Authentication ManagementNetwork Management

Select [On], and then select [Interface Settings], [File Transfer], and [Administrator Tools] for "Available Settings".

See Configuring Administrator Authentication.

Administrator Tools

Administrator Authentication ManagementFile Management

Select [On], and then select [Administrator Tools] for "Available Settings".

See Configuring Administrator Authentication.

Administrator Tools

Extended SecuritySettings by SNMPv1, v2

Prohibit

See Specifying the Extended Security Functions.

Administrator Tools

Extended SecurityDriver Encryption Key:Encryption Strength

AES

See Specifying the Extended Security Functions.

Administrator Tools

Extended SecurityAuthenticate Current Job

Access Privilege

See Specifying the Extended Security Functions.

Administrator Tools

Extended SecurityPassword Policy

"Complexity Setting": Level 1 or higher, "Minimum Character No.": 8 or higher

See Specifying the Extended Security Functions.

Administrator Tools

Network Security Level

Level 2

To acquire the machine status through printer driver or Web Image Monitor, enable "SNMP" on Web Image Monitor.

See Specifying Network Security Levels.

Administrator Tools

Service Mode Lock

On

See Restricting a Customer Engineer Operation.

Administrator Tools

Machine Data Encryption Settings

Select [Encrypt], and then select [All Data] for "Carry over all data or file system data only (without formatting), or format all data.".

If [Encrypt] has already been selected, further encryption settings are not necessary.

See Encrypting Data on the Machine.

Scanner Features

Tab

Item

Setting

Initial Settings

Menu Protect

Level 2

See Specifying Menu Protect.

Fax Features

Tab

Item

Setting

Reception Settings

Stored Reception File User Setting

Select [On], and then specify the users or groups who can perform operations on the received documents.

See Other Security Functions.

Initial Settings

Menu Protect

Level 2

See Specifying Menu Protect.

Note

  • The SNMP setting can be specified in [SNMP] under [Configuration] in Web Image Monitor.