Skip header
 

Exporting Device Information

When device information is exported from the control panel, the data is saved on an SD card.

1Log in from the control panel as an administrator with user administrator, machine administrator, network administrator, and file administrator privileges.

2Press [System Settings].

3Insert an SD card into the media slot on the side of the control panel.

For details about inserting the SD card, see "Inserting/Removing a Memory Storage Device", Getting Started.

4Press [Administrator Tools].

5Press [Down arrow keyNext] 4 times.

6Press [Device Setting Information: Export (Memry Strge Devc)].

Operation panel screen illustration

7Set the export conditions.

Operation panel screen illustration

  • Specify whether to [Include] or [Exclude] the "Device Unique Information". "Device Unique Information" includes the IP address, host name, fax number, etc.

  • Specify an encryption key.

8Press [Run Export].

9Press [OK].

10Press [Exit].

11Log out.

Note

  • If import or export fails, you can check the log for the error. The log is stored in the same location as the exported device setting information file.