When the IEEE 802.11 Interface Unit is Installed
PreviousNext
Please pay attention to the following when using the IEEE 802.11 interface on the network.
When using the wireless LAN interface on the network, note the following:
When moving the machine
Detach the antennas when relocating the machine locally.
After moving the machine, reattach the antennas, ensuring that:
The antennas are positioned clear of obstacles.
(mainly Europe and Asia)There is a 40 to 60 mm distance between the antennas, so that they do not touch.
(mainly North America)There is a 1.6 to 2.4 inches distance between the antennas, so that they do not touch.
The ADF does not knock the antennas.
If the network area provides poor radio environment
Where radio wave conditions are bad, the network may not function due to interrupted or failed connections. When checking the wireless LAN signal and the access point, follow the procedure below to improve the situation:
Position the access point nearer to the machine.
Clear the space between the access point and machine of obstructions.
Move radio wave generating appliances, such as microwaves, away from the machine and access point.
For more information about access point radio wave conditions, see the access point manual.
