Skip header
 

Connecting the Telephone Line

To connect the machine to a telephone line, use a snap-in modular type connector.

CAUTION

  • A telephone line cable with a ferrite core must be used for RF interference suppression.

Important

  • Make sure the connector is the correct type before you start.

Illustration of connecting the telephone line (numbered callout illustration)

  1. Extra G3 interface unit connector

  2. G3 interface unit connector

  3. External telephone connector

Note

  • RegionA icon(mainly Europe and Asia): If you connect a modular cable to the G3 interface unit connector, make two loops 4 cm (1.6 inches) (1) from the end of the modular cable (connection side to the machine) and attach the included ferrite core to the loops as shown.

    Illustration of a modular cable with ferrite core

  • RegionB icon(mainly North America): Use the supplied modular cable with a ferrite core. Connect the end of the cable with the ferrite core to the machine.

    Illustration of a modular cable with ferrite core

PreviousNext