Skip header
 

External options for Type 4 and 5 Region A icon (mainly Europe)

Illustration of external options numbered callout illustration

  1. Lower paper tray

    Paper is loaded here.

  2. Caster table for lower paper tray

    To use the lower paper tray, attach the caster table.

  3. Tray 3 (LCT)

    Consists of two paper trays.

    You can load paper even if Tray 3 (LCT) is in use. It is okay to pull out the left half of the tray while Tray 3 (LCT) is in use.

  4. Large capacity tray (LCT)

    Paper is loaded here.

  5. Lower paper trays

    Consists of two paper trays.

  6. Internal tray 2

    If you select this as the output tray, copied/printed paper or fax messages are delivered here face down.

  7. Internal Multi-Folding unit

    The Internal Multi-Folding unit can apply the following folds: Half Fold, Letter Fold-out, Letter Fold-in, and Z-fold.

  8. Bridge unit

    Relays paper to the finisher.

  9. Internal shift tray

    Sorts and stacks multiple sheets of paper.

  10. External tray

    If you select this as the output tray, copied/printed paper and fax messages are delivered here face down.

  11. Internal Finisher SR3130

    Sorts, stacks, and staples multiple sheets of paper.

    Copies can be punched if the optional punch unit is installed on the finisher.

  12. Finisher SR3210

    Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

    Copies can be punched if the optional punch unit is installed on the finisher.

  13. Booklet Finisher SR3220

    Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

    • Finisher booklet tray

    Copies can be punched if the optional punch unit is installed on the finisher.

  14. Finisher SR3230

    Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

    Copies can be punched if the optional punch unit is installed on the finisher.

  15. Booklet Finisher SR3240

    Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

    • Finisher booklet tray

    Copies can be punched if the optional punch unit is installed on the finisher.

Note

  • You cannot install multiple finishers simultaneously.

  • Finisher SR3210, Finisher SR3230, Booklet Finisher SR3220, and Booklet Finisher SR3240 can be attached only if either the bridge unit or Internal Multi-Folding unit is installed, and either the lower paper trays or Tray 3 (LCT) is also installed.

PreviousNext