External options for Type 1, 2, and 3 (mainly Asia)

One-pass duplex scanning ADF

Load a stack of originals here. They will feed in automatically.

ARDF

Load a stack of originals here. They will feed in automatically.

Exposure glass cover

Lower this cover over originals.

Lower paper tray

Paper is loaded here.

Caster table for lower paper tray

To use the lower paper tray, attach the caster table.

Tray 3 (LCT)

Consists of two paper trays.

You can load paper even if Tray 3 (LCT) is in use. It is okay to pull out the left half of the tray while Tray 3 (LCT) is in use.

Large capacity tray (LCT)

Paper is loaded here.

Lower paper trays

Consists of two paper trays.

Internal tray 2

If you select this as the output tray, copied/printed paper or fax messages are delivered here face down.

Bridge unit

Relays paper to the finisher.

Internal shift tray

Sorts and stacks multiple sheets of paper.

External tray

If you select this as the output tray, copied/printed paper and fax messages are delivered here face down.

Internal Finisher SR3130

Sorts, stacks, and staples multiple sheets of paper.

Copies can be punched if the optional punch unit is installed on the finisher.

Internal Finisher SR3180

Sorts and stacks multiple sheets of paper, and staples them without using staples.

Finisher SR3210

Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:

• Finisher upper tray

• Finisher shift tray

Copies can be punched if the optional punch unit is installed on the finisher.

Booklet Finisher SR3220

Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:

• Finisher upper tray

• Finisher shift tray

• Finisher booklet tray

Copies can be punched if the optional punch unit is installed on the finisher.